Setup Raid on Your Computer
Edited by Pia Marie Villamante, Eng, Robbi, Lynn and 4 others
How to Increase Computer Performance with RAID
Setting up RAID is one of the best ways to increase overall system performance.
RAID is a terminology that initially meant Redundant Array of Inexpensive Disks, but that was back when hard drives were very expensive. In those days, it was less expensive to set up a RAID Array, or group of hard drives, using smaller hard drives to achieve the same storage capacity as one larger drive. It had the added benefit of preventing catastrophic failure, as a failed drive would just roll over to a working drive, and the system would keep working.
These days RAID means Redundant Array of Independent Disks, but it still works the same, using multiple disks to improve overall performance, increase storage capacity, and provide a higher level of fault tolerance. This is because RAID data is able to be mirrored on other disks in the same array. Because of this, if one disk fails, system data is still preserved, and your computer keeps running.
The Different Types of RAID
RAID comes in different types, offering enhanced performance, data protection, or even both.
There are many types of core RAID Arrays. Here are some of the few RAID levels:
- 3is theoretical. This theoretical performance is high but very expensive to implement and as a result, few use it.RAID2:
- 5is when data is written in blocks onto the data disk.RAID4:
Things You'll Need for a RAID Array
- 1Floppy disk
- 2Tools, such as screwdrivers
- 3Hard drives
- 4RAID software
- 5RAID controller
- 6A backup
Steps to Setup RAID on Your Computer
Window Vista and Windows 7 both offer RAID software.
Here are the steps:
- 1Click the start menu.
- 2Right click on "Computer" and choose "Manage".
- 3Select "Storage", then click on "Disk management".
- 4Right click on the drive icon that lies to the left for operations that will affect the whole disk.
- 5What's available on your version and your disk setup will be enabled.
- 6Follow the instructions that it offers. If your disk isn't dynamic, this step will help you to automatically convert it.A guide will appear for some core RAID levels.
- 7With dynamic disks, you can right click on the volume and use the option to mirror it.
- NOTE: It can take a long time for Windows RAID mirrors that are new to sync up. This depends on the existing data. Because of this, disk performance can suffer until the process is completed.
Categories : Hardware
Recent edits by: Dougie-1, Rob, JMA