Put On or Take Off an iPhone 6 Case
Edited by Grimm, Vanessa, Eng
You are watching VisiHow. Today, we are going to show you something with the iPhone 6 that challenges many a man and many a woman. That something is known as the phone case.
Steps
1
Now for many of us, we struggle with our phone case
.
We try, try, and try to put it in. We have a thousand dollar phone that suddenly flips out and falls on the floor, breaks because we couldn't get the case on it.
2
Other times, we end up throwing the phone into a pocket or a purse (not that I have a purse, some of you may) and that purse or that pocket causes scratches all over the base of the phone
.
Sometimes we may have small things like little bits of change, little coins like this one, and they just scratch across the base of that phone.
3
Not good - ruins an otherwise nice phone
.
So what do we do? Well the first thing we do is we get what's known as a Sapphire screen cover. If you can see, on this phone there is a small line here - let's move that a wee bit closer for you - there you are - there's a small line here.
4
That is because I have a Sapphire cover on this phone
.
(One second, I'm cleaning it with my leg.) This Sapphire cover is the same as a normal Sapphire screen cover, except it's very thin. But it protects my phone. However, the sides of this iPhone aren't protected.
5
The bottom is unprotected
.
6
In other words, this is a vulnerable phone
.
In order to protect this poor phone, we need a case. Now, what I've done is I've got a soft protective case that's made from a specific type of gel that's very, very impact resistant.
7
In order to put the phone in this case, you slide the phone down bottom-first
.
8
Then we take the top part, and we just slide our fingers along and push that in until it pops
.
9
If it doesn't pop, you're going to have to fold it out a little bit with your finger like this, and then push
.
10
And now the phone is not only in a case, but displaying stock information from me
.
So, now our phone is in the case. As you can see, this case actually has a seal at the bottom for both the headphone jack and the water jack.
11
Just push those in once you've got it in the case
.
12
And this is how you put the phone into the case
.
When you're ready to take your phone out of the case, the same thing applies. Open the dust and water seals in the bottom
13
And then slowly push the bottom edge off
.
14
Slowly push the other bottom edge off
.
15
And then just slide the phone out
.
16
And now your phone is out of the case, and you can clean the back of it or the front of it or set it down.
17
But whatever you do, be very careful you don't drop it
.
So, this concludes our tutorial on putting a case on your lovely iPhone 6. Thanks for choosing VisiHow. Have a great day, and we will look forward to seeing you in our other videos on the iPhone 6.
Video: Put On or Take Off an iPhone 6 Case
Categories :
IPhone
Recent edits by: Vanessa, Grimm