Factory Reset a Digital2 D2-927G Tablet

4 Parts:

How to Factory Reset Your Digital2 D2-927G 9" Tablet

Tips and Suggestions for Factory Resetting Digital2 Tablets

Questions and Answers

Comments

This article is part of our series on the Digital2 D2 Tablets. If you need help with a different device, please reference the parent guide.

Follow these steps to reset the D2927G to it's factory default state.

A popular budget Tablet used in many homes, the 927G can be difficult to reset or interact with if you don't know how it is different than more mainstream Android devices, like the Samsung Galaxy. This guide contains a list of steps that will help you reset your Tablet to a factory default state.

• If you just want to reset your D2-927G Password, you can do that by following these steps.
  

1. 1
   Power down your Tablet.

   Was this step helpful? Yes | No| I need help
2. 2
   Once it has powered down, press and hold the 'Volume Up' button.

   Was this step helpful? Yes | No| I need help
3. 3
   While still holding the 'Volume Up' button, press and hold the 'Power' button.

   Was this step helpful? Yes | No| I need help
4. 4
   Keep pressing both buttons until you see the Digital2 logo appear (from 10 to 15 seconds).

   Was this step helpful? Yes | No| I need help
5. 5
   When you see the Digital2 logo, immediately release both buttons.

   Was this step helpful? Yes | No| I need help
6. 6
   After a moment, you will see an icon of an 'Android' robot on it's back, with a red triangle sitting on top of it.

   Was this step helpful? Yes | No| I need help
7. 7
   When you see this, press and hold the 'Power' button, and single press the 'Volume Up' button once.

   Was this step helpful? Yes | No| I need help
8. 8
   This should open the 'Android System Recovery' menu selection screen.

   Was this step helpful? Yes | No| I need help
9. 9
   Let go of your 'Power' button.

   Was this step helpful? Yes | No| I need help
10. 10
    From here, use your 'Volume Down' button to scroll down to the 'wipe data/Factory Reset' option.

    Was this step helpful? Yes | No| I need help
11. 11
    Press your 'Power' button to select it.

    Was this step helpful? Yes | No| I need help
12. 12
    Now, scroll to the 'Yes - delete all user data' option.

    Was this step helpful? Yes | No| I need help
13. 13
    Press your 'Power' button to select it.

    Was this step helpful? Yes | No| I need help
14. 14
    Wait a few minutes for your Digital2 tab to finish resetting and restoring to the factory default state, and you're done.

    Was this step helpful? Yes | No| I need help

The following tips will help reset your D2 Android Tab to it's factory default state.

• Make sure your device is fully charged. Losing power part way through resetting an Android device to a factory default state can leave your device in an unrecoverable state.
• Back up your data. Any information on your D2 Tablet will be deleted when you perform a Factory Reset.
• Do not plug in or unplug your device to any power or USB ports while you are performing a factory restore, unless you have been specifically instructed to do so by alternate instructions from Digital2.

Digital2 is frozen; I have tried resetting and nothing happens?

How do I unfreeze and reset the system so I can use it? Only the logo shows up on screen and nothing more.

Your Digital2 tablet is stuck in a boot loop. As its name implies, a boot loop is when your device is unable to complete the boot up process and instead loops from on to off. To fix this issue, you will have to perform a Factory Reset. Performing a Factory Reset will wipe all of your tablet's data; however, it's the only option you have at this point to fix your tablet. To learn how to perform a Factory Reset on your Digital2 tablet, read through and follow the instructions in the great VisiHow article above.

Digital2 logo is stuck again. Just did a Factory Reset a week or two ago and haven't used it since. Just turned it on now, and the logo is there again? Do I have to do a reset every time I use it now?

Digital2 logo is stuck again. Just did a Factory Reset a week or two ago and haven't used it since. Just turned it on now, and the logo is there again? Do I have to do a reset every time I use it now?

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

If you have problems with any of the steps in this article, please ask a question for more help, or post in the comments section below.

Comments