Control Motion with Smart Pan Tilt Controller for K2 Slider
Edited by Djinu, VisiHow, Eng
Hi. You're watching VisiHow. In this video, we're going to show how to use the Smart Pan/Tilt Controller to control the slider on your Konova K2 slider.
Steps
1
Press your joystick to go into the "Live Motion" setting
.
2
Press your joystick to select "Slide Move"
.
3
Press down on your joystick to move to "<LEFT<ENT>RIGHT>"
.
You can choose to go either left or right. Before moving the joystick, press "ENT" to select an option.
4
Now, if you push the joystick left, the slider will move left as long as you're holding the joystick
.
5
If you push the joystick right, the slider will move right as long as you're holding the joystick
.
6
To enable "AUTO MOVE", press "Escape"
.
It is located on the lower-right side of the controller. Then, go to the "AUTO MOVE" menu. The "PAN/TILT MOVE" menu is for a separate controller which I don't have, so for this tutorial, I will not discuss the "PAN/TILT MOVE" or the P/T + SLIDE" menus.
7
In the "AUTO MOVE" menu, you can choose for the slider to automatically go left or right when you press the joystick once
.
8
The slider does have a safety feature, so when reaches the end it will automatically stop
.
That was how to use slide left and slide right on the Konova Smart Pan-Tilt Controller. If you have any questions or comments, please leave them in the space below. Thanks for watching VisiHow!
Video: Control Motion with Smart Pan Tilt Controller for K2 Slider
Categories :
Cameras & Photography
Recent edits by: VisiHow, Djinu