Add, Remove and Split Audio Tracks using Corel VideoStudio X8

4 Parts:

Steps

Video: Add, Remove and Split Audio Tracks using Corel VideoStudio X8

Questions and Answers

Comments

Welcome to VisiHow. This is a tutorial on how to split the audio for editing or removal in Corel VideoStudio X8.

1. 1
   The first thing we want to do is make sure we have the video we want to split the audio from

   .

   This would be an existing video that we would like to remove the audio from. Perhaps it's just noise, or we want to do a narration over top, or we just want to play music instead of someone's voice and we don't want the two things playing together. We've already added a video and we're going to select the clip by clicking on it.

   

   Was this step helpful? Yes | No| I need help
2. 2
   Once we click on it, we're going to right-click and click on "Split Audio"

   .

   Was this step helpful? Yes | No| I need help
3. 3
   We'll see that we now have a clip of only the video and no sound

   .

   At the bottom, we have another clip of the audio.

   Was this step helpful? Yes | No| I need help
4. 4
   At this point, we can select the audio, and we will see a new options menu shows up on the top right area of the screen

   .

   Was this step helpful? Yes | No| I need help
5. 5
   From here, we can increase or decrease the volume

   .

   Was this step helpful? Yes | No| I need help
6. 6
   We can change the speed or the time-lapse

   .

   Was this step helpful? Yes | No| I need help
7. 7
   We can click "OK", "Preview" or "Cancel" when we're done with that

   .

   This is good for if we want to show photos while still hearing the audio. We can just change the duration of the clip and increase or decrease the speed of the clip as well.

   Was this step helpful? Yes | No| I need help
8. 8
   The other option, as mentioned before, is to remove it

   .

   We can do that by selecting the audio and hitting the "Delete" button on the keyboard, or right-click and click on "Delete". Now we simply have a clip with only the visual part. We don't have the sound.

   Was this step helpful? Yes | No| I need help
9. 9
   From there, we can go and select music

   .

   Was this step helpful? Yes | No| I need help
10. 10
    When we find the audio we want, we can left-click and drag it to where the audio was before

    .

    Was this step helpful? Yes | No| I need help
11. 11
    We are going to shorten the audio by clicking and dragging the end of it to the duration of the movie

    .

    Was this step helpful? Yes | No| I need help
12. 12
    If we wanted to record the audio instead, we could simply remove the audio and click on the record button

    .

    Was this step helpful? Yes | No| I need help
13. 13
    We could then select "Voiceover"

    .

    Was this step helpful? Yes | No| I need help
14. 14
    We can then test the microphone and select "Start"

    .

    We are then going to record our voiceover.

    Was this step helpful? Yes | No| I need help
15. 15
    When we're done, we click on the record icon once again

    .

    Was this step helpful? Yes | No| I need help
16. 16
    The audio recording is now playing with the video

    .

    In this case, the image is shorter than the audio so we could add photographs or whatever our imagination comes up with. Corel VideoStudio is a very user-friendly software package, so there are many possibilities with it.

    Was this step helpful? Yes | No| I need help
17. 17
    Of course, we should save any changes we make in VideoStudio by clicking on "File" and "Save" so that it will be available to us for next time

    .

    As long as it is a VideoStudio file, we can come back in and change these settings. If we save it like this, this is how we will see it the next time we open it. We can't change anything once we have rendered our video because these are basically individual layers.

    Was this step helpful? Yes | No| I need help
18. 18
    That is basically how you split the audio from an existing video and replace it with music or a voiceover in Corel VideoStudio X8

    .

    Thank you for watching VisiHow. If you have any questions or comments about this video, please feel free to leave them in the comment section below. You've been watching VisiHow. Take care.

    Was this step helpful? Yes | No| I need help

How do I line up the new audio, which I recorded separately?

Hi! I recorded the audio with a better microphone, while my video camera was recording. I like your tutorial on how to split off and delete the original crummy audio. How do I align the "good" audio track with the visuals? Thanks!

Synchronizing a new track with the old video can be a long and thorough process. It can be like jeweller's work where every millisecond counts. Sometimes, synchronizing and editing may even take 1 hour per 1 minute.

1. 1
   To split your audio track in two moveable pieces, click the spot where you want to split it and click the scissors icon

   .

   By splitting, you can achieve smaller pieces that can be adjusted in duration, location, or speed.

   Was this step helpful? Yes | No| I need help
2. 2
   If your video is behind or ahead of the track, zoom in and move the small piece left or right on the timeline by clicking and dragging the track.

   Was this step helpful? Yes | No| I need help
3. 3
   If something in your audio is slower or faster than it should be, you need to slow the track piece down or make it faster as shown in the tutorial.

   Was this step helpful? Yes | No| I need help
4. 4
   If you cannot match the video with the audio at all, then you can rerecord only a small piece and insert it.

   Was this step helpful? Yes | No| I need help

Why does my video become slow after split audio?

My video becomes so slow after split audio, I want to reduce noise with New Blue Noise Reducer filter, and after split audio and use this filter, my video becomes so slow. How can I do, thanks a lot?.

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

Is there a way to mute segments of an audio file in Coral video studio x9?

Is there a way to mute segments of an audio file in Coral video studio x9?

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

How do you delete part of the visual part of the video without the sound also being deleted?

Hello,. I'm trying to delete a portion of a video and replace the image during that span of time with the image from a different video. But I would like the sound from the first video to continue playing while the second video is being shown. When I try to delete the segment of the first video, it moves the audio, too. Do you know how to solve this problem? Thank you! I am trying to keep the audio and swap out a portion of the video not keep the video while not wanting the sound.

VisiHow QnA. This section is not written yet. Want to join in? Click EDIT to write this answer.

If you have problems with any of the steps in this article, please ask a question for more help, or post in the comments section below.

Comments