Install MicroSD card and Battery for the GoPro Hero3 Camera
Edited by Thor, Rose Najj, Eng
Hello, and welcome to VisiHow. In this video we are going to show how to insert the microSD card and the battery in your GoPro HERO3 black edition.
First thing you need to do, is to take the GoPro out of the housing.
We go the Lever as you can see, pull the Lever back.
Pull back the back screen and take it out of the housing.
Take the GoPro out of the housing.
Now we are going to insert the microSD card, You can see on the side, there is a hatch.
Pull that up to take it out.
As you can see, there is 3 Ports.
A USB, HDMI, and the microSD
The GoPro does not come with the microSD card, you need to buy that.
That microSD card comes with a Data Adapter, as you can see here.
You can easily fit that microSD in the Adapter and push it in.
It should step in there like that.
Now, we just take that back out, and insert it into the Camera.
Slip it until you hear a click.
Turn the camera to the back.
This where we put the battery.
You need to press the notch down here.
Flip it and the cover should drop out very easily.
Put the battery in the space you see.
Facing towards you, as you can see here
As you can see, there is a small tab on the back of that battery.
That tab allows you to pull that battery out if you need to extract easily.
Now you need to put the cover back on.
a Slight push until you hear a click.
Put the camera back in the housing.
Slit that back on with the lens facing the lens hole.
Put the back cover back on.
Make sure that the waterproof rim is properly fit inside, so it is fully waterproof again.
Now you are ready to make some assume movies.
This was how to insert the microSD card and Battery into your GoPro HERO3 Camera, if you have any suggestions, please leave them in the section below.
You have been watching VisiHow, Goodbye
Video: Install microSD card and Battery for the GoPro Hero3 Camera
Cameras & Photography
Recent edits by: Rose Najj, Thor