Add or Remove a Case from HTC One M8

Edited by Grimm, Crystal, Eng

You're watching VisiHow. Today, we are going to show you how to add or remove a case from the HTC One M8.


Steps

  1. 1
    As you can see, I currently have the factory case that comes with the phone, so I'm going to show you how to remove it without damaging or dropping your phone
    .
    You'll notice that the case has an opening at the top.
    Advertisement
    Was this step helpful? Yes | No| I need help
  2. 2
    It also has a piece at the bottom that covers up the headphone jack and the micro USB charging port; open it so that the ports are not covered
    .
    Make sure there is nothing else obstructing or holding the case on.
    Advertisement
    Was this step helpful? Yes | No| I need help
  3. 3
    Put your thumb at the bottom right corner on the phone next to the headphone jack and charging port and slide your thumb with some pressure to take the case off of that corner
    .
    Was this step helpful? Yes | No| I need help
  4. 4
    Put your thumb between the phone and the case and either slide your thumb up the side of the phone or across the bottom
    .
    I prefer to slide it across the bottom of the phone because I can move my thumb a little bit and pull the case off of the other edge.
    Was this step helpful? Yes | No| I need help
  5. 5
    Then, you simply slide the phone out of the case
    .
    Was this step helpful? Yes | No| I need help
  6. 6
    When you'd like to put the phone back in the case, make sure the bottom part is open and slide the phone down into the bottom of the case
    .
    Was this step helpful? Yes | No| I need help
  7. 7
    Take the top corners and push it on with your finger
    .
    Once you get one corner on your can sort of wiggle the other side in. If it doesn't work, do the same thing with your thumb. Put your thumb in the side, slide it to the corner, and then push the case on. It takes a little bit of effort, but the thing to remember is that this is metal phone, not plastic, and this is a plastic case. Obviously the plastic is going to flex and give quite a bit more than the metal. Once that is done, your phone will be in the case.
    Was this step helpful? Yes | No| I need help
  8. 8
    Both of the cameras that are on the phone have a very hard lens, so if you notice it's dirty you can take a soft cloth and clean them
    .
    You can also use your shirt to clean them. I recommend stopping into your local eyeglass store and picking up a cloth used to clean glasses. Ask them and they will either give you one for free or for a dollar or two.
    Was this step helpful? Yes | No| I need help
  9. 9
    Again, to take the case off, simply pop open the piece at the bottom, pull down on the corners of the case, then slide the HTC One M8 out and admire the beautiful shiny silver finish, as well as the two cameras on the back
    .
    Was this step helpful? Yes | No| I need help
  10. 10
    There is also a camera on the front
    .
    Was this step helpful? Yes | No| I need help
  11. 11
    This concludes the tutorial on how to add or remove a case from the HTC One M8
    .
    If you have questions or comments please leave them in the section below. Thank you for watching VisiHow.
    Was this step helpful? Yes | No| I need help

Video: Add or Remove a Case from HTC One M8

If you have problems with any of the steps in this article, please ask a question for more help, or post in the comments section below.

Comments

VisiHow welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Article Info

Categories : HTC

Recent edits by: Crystal, Grimm

Share this Article:

Thanks to all authors for creating a page that has been read 647 times.

x

Thank Our Volunteer Authors.

Would you like to give back to the community by fixing a spelling mistake? Yes | No